Canfield SBC 195cc 23* Head 195 cc Intake runners 2.055 Intake and 1.60 Exhaust Valves 65cc CNC profiled combustion chamber standard. Non CNC profiled chambers are available. However, the CNC profiling is HIGHLY recommended An aftermarket piston should be used. If you are using a stock piston, then most applications will require notching of the piston Camshaft Innovations offers a stud rocker valve train Valve to piston clearance is another must check dimension Exhaust ports are in the stock location Cast from the finest A356 Virgin Billet Machined on the latest precision, computer controlled machining centers Can use stock valve covers with slight modifications Autolite 3924’s are Camshaft Innovations' choice for spark plugs Hardened guide plates are included Assembled to Camshaft Innovations specifications Valve Lift Intake  Exhaust .200” 145  107 .300” 201 143 .400” 247 175 .500” 258 190 .600” 259 200 .700” 260 203 Flowed using a SF-600 Radius inlet on intake 1 ¾" Pipe, 5” long on exhaust 4.030” Bore COST: Be sure to ask Cam Master Jay about package discounts when buying heads and cam! $1395.00 Assembled. All good parts. Springs to match. No ridiculous spring upgrade needed to run any HR, SFT, HFT. $150.00 Upgrade to mechanical roller $175.00 Upgrade to titanium retainer $50.00 Deduct for non-CNC chambers $155.00 Canfield Stud girdle with locks If you have a custom application or something that is very unique to you, please contact Cam Master Jay for your special needs!

To contact Cam Master Jay, please call 734.730.2574 from 9am-7pm or e-mail him at jay@camshaftinnovations.com

***No Refunds***No Exchanges***